CurtPalme.com Home Theater Forum

maciek · Joined: 18 Dec 2012 Posts: 3 Location: Poland

Electrohome Marquee 8500 model 38-P13085-AC. For a time, the green tube from time to time (a few seconds) ceased to shine, now the original and converted at all does not work. Please help - where to start searching for the problem, maybe some contact is invalid?

Nashou66 · Joined: 12 Jan 2007 Posts: 16171 Location: West Seneca NY

DID it go in and out of focus before it finally stop working or did it just stop all together?

Athanasios

maciek · Joined: 18 Dec 2012 Posts: 3 Location: Poland

Before the failure of the green tube image was sharp, but every now and then ceased to shine for a few seconds and back to work. But now when you turn on at all not launched a green tube

Nashou66 · Joined: 12 Jan 2007 Posts: 16171 Location: West Seneca NY

Check the Connection on the VIM first.

Athanasios

maciek · Joined: 18 Dec 2012 Posts: 3 Location: Poland

It's all clear - it was a bad contact in the Neck BD Video on the green tube. Everything works fine! Thank you for your help!

Nashou66 · Joined: 12 Jan 2007 Posts: 16171 Location: West Seneca NY

Your welcom, that was going to be my next post if it wasn't the VIM.

Athanasios