CurtPalme.com Home Theater Forum

jcoles · Joined: 17 Jul 2008 Posts: 40

I recently purchased A Moome card with the dual inputs for my Marquee 9500. In the left input I had a direct connection from the HDMI output of my Bluray. In the other was a dircet connection from the HDMI of my computer. Initially all was well. Now I am not getting an image from my Bluray despite the light being green on the back of the Moome card. When I disconnect the computer from the right and put the bluray into that one, I get a picture. Is my card bad?

jarseneau · Joined: 06 Nov 2007 Posts: 323 Location: WI

Not sure if this is your problem but it sounds like you simply need to switch the moome card to the other input by either pressing the black button on the card or pressing 1 or 2 on the remote. The light will be GREEN when there is an incoming HDMI signal plugged into the input. It will change to AMBER when you select the input to be active.