CurtPalme.com Home Theater Forum

Esel · Joined: 21 Jun 2007 Posts: 87 Location: Germany

Hi,
a friend of mine has a strange behavior on the red tube of his 1270.
With a signal on the IFB-10QA he won't get an image on red.
Connected to blue there is a signal on red so the cable isn't the problem.

If he pull out the IFB-board he get a red glow on the tube.

I have calibrated the 1270 half a year ago and there was no problem.

Wich board should we swap? I have some spare-boards here.

Thanx Andreas

**Curt Palme** · Posted: Thu Feb 04, 2010 2:48 pm Post subject:

Does the video/Svideo input show red? What about the test patterns?

Esel · Joined: 21 Jun 2007 Posts: 87 Location: Germany

Video-input shows red glow and no image, Testpattern shows no H or grid but red glow and all that happened suddenly while watching.

**Curt Palme** · Posted: Thu Feb 04, 2010 9:59 pm Post subject:

This is most likely the CAG board.

Cheers!

Esel · Joined: 21 Jun 2007 Posts: 87 Location: Germany

Thanks, we'll check that...

Esel · Joined: 21 Jun 2007 Posts: 87 Location: Germany

Thanks Curt, perfect match.
Pole-Magnets seems to need new adjustment but the new CAG works now.

Andreas