| Author |
Message |
Rendy
Joined: 15 Dec 2008
Posts: 4
Location: Holland
|
| Posted: Mon Dec 15, 2008 11:07 pm Post subject: Barcovision 701 menu problem |
|
|
Dear members,
Could someone please help me with this strange problem i have with my Barcovision 701.
The green of the menu starts to blink and disappears completely.
This is making it impossible to ajust the pj.
The green of the displaying source is completely normal.
Only green from the menu is missing.
I can't read the text of the menu or see the green raster in the converce menu.
Red and blue are normal in the menu.
Thanks in advance for all the replies.
Rendy
|
|
| Back to top |
|
 |
Curt Palme
CRT Tech
Joined: 08 Mar 2006
Posts: 24396
Location: Langley, BC
TV/Projector: All of them!
|
| Posted: Mon Dec 15, 2008 11:18 pm Post subject: |
|
|
|
Wow, that is a strange one! IT's going to be a problem on the input board I think. THe menus are generated on the controller board, and injected on the input board. This will need a board swap. I probably have one. Send me a pix (or post it) or post the 761XXX part number of the board.
|
|
| Back to top |
|
|
Rendy
Joined: 15 Dec 2008
Posts: 4
Location: Holland
|
| Posted: Tue Dec 16, 2008 8:42 am Post subject: |
|
|
wow thats a quick respond.
Any idea what the cost are for that board?
Tonight i will remove the board to see it there is any optical damage to it.
At a cold boot the green is present in the menu.
|
|
| Back to top |
|
|
Rendy
Joined: 15 Dec 2008
Posts: 4
Location: Holland
|
| Posted: Mon Dec 29, 2008 8:35 pm Post subject: |
|
|
First of all sorry for the late reply. (got ill)
I took the whole thing apart, wrote down all the numbers, refitted everything.
And now everything works completely normal again.
Looks like the problem fixed itself.?
|
|
| Back to top |
|
|
|
|
