| Author |
Message |
jaredjaric
Joined: 05 Jun 2007
Posts: 228
Location: Philippines
|
| Posted: Sat Oct 18, 2008 10:17 am Post subject: cine 9 eht board "missing" parts |
|
|
|
HI ,need to know from people with cine 9,if they have the r66 and r67 installed on their eht boards.It is near the eht main fuse and power cap c45(100mf).mine does not have it.I have ordered the board from Curt,but still needs to know if these parts were deleted,because in my service diagram, the board should have these parts.
|
|
| Back to top |
|
 |
kal
Forum Administrator
Joined: 06 Mar 2006
Posts: 18114
Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
|
| Back to top |
|
|
jaredjaric
Joined: 05 Jun 2007
Posts: 228
Location: Philippines
|
| Posted: Mon Oct 20, 2008 1:24 am Post subject: |
|
|
| kal wrote: | What Barco part number & revision is this EHT? There have been many revisions. Some of the later ones have considerably less parts.
Kal |
The unit is with the barco dealer here in Manila,the tech guys there thinks the resistors and caps should be there based on their service manual,otherwise their manual would indicate these as deletions on newer boards.So they are kind of thinking i might have taken them out myself.Which i did not.
I am also waiting for the eht board from Curt,so can not compare boards and check if it was a revision made by Barco.The unit is a cinemax,2002 model,which would indicate it as the first series of cine9 pjs.
|
|
| Back to top |
|
|
|
|
