| Author |
Message |
WanMan
Joined: 19 Mar 2006
Posts: 10270
|
| Posted: Thu Jul 26, 2007 10:26 am Post subject: |
|
|
| CRT_Ben wrote: | | WanMan wrote: | | Seriously, unless the Nyko itself melts and causes evidences on the chassis then I am a little bewildered how any sane person could determine what I did and didn't do. |
That's exactly what I'm talking about, couldn't you bother to read the link I posted?  Here are only some of the accounts from the first 20 reviews on the site:
| wrote: |
“I tried to pull it off, but It wouldnt budge. After finally getting it off, I was overwhelmed by the smell of burnt plastic. The connections on the intercooler were crusty and black, and had left marks allover my 360.”
“When I looked at the cooler I realised that there were burn marks and places where I could see that sparking had occured.”
“mine melted this waxy stuff all over the inside of the power supply,”
“it wasnt until recently i read about microsoft advising against this product because of the strain on the power supply.”
“This item melted the power supply and sparked after haveing to use tools to remove it because of the melting it was black from sparking, my xbox dosen't work anymore so now im going to have to buy another one”
“Because it is running on the 360 power supply, not enough power is sent to places where it needs to be in the xbox 360,” |
|
Ben, when you post a link to CIRCUIT SHITY I give no credibility to the link and whatever is contained within it. Sorry.
That being said, I would imagine that if this were the case then most retailers would already be pulling the product as unsafe, and to circumvent any potential mass liability. But this is something I'd presume if mass failures werer at hand, and not just something CS had to say.
_________________
Trust no one. Absolutely no one. Advice of the board.
|
|
| Back to top |
|
 |
CRT_Ben
Joined: 28 Aug 2006
Posts: 1684
Location: Northern Virginia
|
| Posted: Thu Jul 26, 2007 12:20 pm Post subject: |
|
|
| WanMan wrote: | | Ben, when you post a link to CIRCUIT SHITY I give no credibility to the link and whatever is contained within it. Sorry. |
Sorry, when that many people are receiving the same failure, I find it hard to believe that they're all setting it up wrong.
But if you want to stick your nose up in the air, how about:
IGN, and Nyko publicly admits fault:
http://gear.ign.com/articles/746/746329p1.html
Engadget:
http://www.engadget.com/2006/10/27/nyko-intercooler-scorches-xbox-360-consoles/
Gameworld Network:
http://www.gwn.com/articles/article.php/id/813/
Amazon:
http://www.amazon.com/Nyko-743840860204-Xbox-360-Intercooler/dp/B000F5RW1U
Technabob:
http://technabob.com/blog/2006/10/26/nyko-intercooler-not-cool-for-microsoft/
Just google "Nyko Intercooler failure" and you'll find that, and much more...
| WanMan wrote: | | That being said, I would imagine that if this were the case then most retailers would already be pulling the product as unsafe, and to circumvent any potential mass liability. But this is something I'd presume if mass failures werer at hand, and not just something CS had to say. |
Well, since the company admitted fault, they've redesigned the problem area and released the Intercooler EX:
http://gear.ign.com/articles/796/796951p1.html
| WanMan wrote: | | CIRCUIT SHITY |
Glad to see you can spell as well as the CC reviewers you're bashing.
Thanks for playing,
Ben
|
|
| Back to top |
|
|
Z-Photo
Joined: 07 Mar 2006
Posts: 2749
Location: Huntsville - Alabama
|
| Posted: Thu Jul 26, 2007 1:15 pm Post subject: |
|
|
I always refer to CC as sh*tty City (but I used to work there - got fired cause i was on WC) 
_________________
Engineer by Day
Photographer by Night
My Portfolio
The Only GOOD AMPRO - is a Dead AMPRO.
wait - are they not all DEAD already?
|
|
| Back to top |
|
|
CRT_Ben
Joined: 28 Aug 2006
Posts: 1684
Location: Northern Virginia
|
| Posted: Thu Jul 26, 2007 1:23 pm Post subject: |
|
|
| Z-Photo wrote: | | I always refer to CC as sh*tty City (but I used to work there - got fired cause i was on WC) |
Hey man, I call it that too. I was just objecting to WanMan's offhand dismissal of everyone who has ever used the CC review site.
|
|
| Back to top |
|
|
JustGreg
Joined: 07 Mar 2006
Posts: 3098
Location: Kenosha, WI
|
| Posted: Sat Jul 28, 2007 4:57 pm Post subject: |
|
|
Well I got an email from M$ repair....my 360 is on it's way back. Funny thing is when I called UPS with the tracking number based on some weird reschedule message at UPS.com, I was told delivery was delayed and rescheduled because M$ had reached and exceeded their UPS account limit. 
I found it hilarious that a company that posted a $3.1B profit for Q2 (despite the 360 repair debacle) ran out of credit.
Anyway...looks like it'll be here in time for the HD-DVD releases of Fuzz and 300.
Side Note: Has anybody noticed how hot n heavy TNT has been advertising HD-DVD content and players? Last night there must have been 8 or 9 commercials in an hour and a half period relating to HDDVD.
Man I want to open that thing up when it gets here to see if I got the updated cooling system.....damn warranty seals! I THOUGHT I had a source for some original seals on a roll but the dude wanted $1500.00 for 150 of them.
Looks like I'm back in the game!  Now all I need is the release of H3 and Army of Two and I'm fat (literally) and happy.
Greg
_________________
Greg
"Is it ignorance or apathy? Hey, I don't know and I don't care!" --Jimmy Buffett
|
|
| Back to top |
|
|
Joust
Joined: 05 May 2006
Posts: 2429
Location: Almonte, Ontario, Canada
TV/Projector: Marquee 8501LC
|
| Posted: Sat Jul 28, 2007 6:44 pm Post subject: |
|
|
If you hold a bright flashlight to the Back USB opening and peer into the side of the unit you can see the space where the NEW Updated heat sink should be.
No need to open it.
I'd be interested in seeing if you got one too.
I got 4 machines back and none of them were the newer rev.
|
|
| Back to top |
|
|
JustGreg
Joined: 07 Mar 2006
Posts: 3098
Location: Kenosha, WI
|
| Posted: Fri Aug 10, 2007 7:03 pm Post subject: |
|
|
Welp....the replacement came last week....and died last night. SUPPOSEDLY it was a new console, not a repair. As soon as I read the insert in the box with the replacement unit I groaned because I just KNEW that I'd end up with a first run POS. 
It locked up in a game last night.....I threw the controller at the f*cking console, turned the PJ off, hit the lights on the way out...and tried to call 8004mybox...they were closed for the night. (11pm).
THIS time I'm telling them I want my f*cking money back and they can buy back the damn HDDVD add-on too....and then I'm going to buy a PS3. (Sorry Dave...but I really enjoy gaming now the kids are grown and/or gone from the house). The last thing I wanted to do was support Sony but at least their sh*t (in this case) works consistently.
Grrrrrrrrrrrrrrrrrrrrrrrrrrrrr!!!!! 
Greg
_________________
Greg
"Is it ignorance or apathy? Hey, I don't know and I don't care!" --Jimmy Buffett
|
|
| Back to top |
|
|
emdawgz1
Joined: 14 Mar 2006
Posts: 7949
|
| Posted: Fri Aug 10, 2007 7:16 pm Post subject: |
|
|
| JustGreg wrote: | Welp....the replacement came last week....and died last night. SUPPOSEDLY it was a new console, not a repair. As soon as I read the insert in the box with the replacement unit I groaned because I just KNEW that I'd end up with a first run POS.
It locked up in a game last night.....I threw the controller at the f*cking console, turned the PJ off, hit the lights on the way out...and tried to call 8004mybox...they were closed for the night. (11pm).
THIS time I'm telling them I want my f*cking money back and they can buy back the damn HDDVD add-on too....and then I'm going to buy a PS3. (Sorry Dave...but I really enjoy gaming now the kids are grown and/or gone from the house). The last thing I wanted to do was support Sony but at least their sh*t (in this case) works consistently.
Grrrrrrrrrrrrrrrrrrrrrrrrrrrrr!!!!!
Greg |
HAHAHA Join us on the Dark Side!
| Description: |
|
| Filesize: |
126.89 KB |
| Viewed: |
11103 Time(s) |
|
_________________
Follow my blog
www.thesinglebrother.com
|
|
| Back to top |
|
|
JustGreg
Joined: 07 Mar 2006
Posts: 3098
Location: Kenosha, WI
|
| Posted: Fri Aug 10, 2007 7:21 pm Post subject: |
|
|
I need to Photoshop that pic....with the light saber slashing down through a 360 console!
_________________
Greg
"Is it ignorance or apathy? Hey, I don't know and I don't care!" --Jimmy Buffett
|
|
| Back to top |
|
|
Curt Palme
CRT Tech
Joined: 08 Mar 2006
Posts: 24396
Location: Langley, BC
TV/Projector: All of them!
|
| Posted: Fri Aug 10, 2007 11:21 pm Post subject: |
|
|
I saw my first PS3 yesterday, and I have to say, from the outside at least, the PS3 looks a lot more solid than the X360. Not that that's saying much.
I did note that there's a LOT of HOT air coming out of the PS3 as well, so let's revisit in a year from now...
|
|
| Back to top |
|
|
kal
Forum Administrator
Joined: 06 Mar 2006
Posts: 18114
Location: Ottawa, Canada
TV/Projector: JVC DLA-NZ7
|
| Posted: Sat Aug 11, 2007 12:47 am Post subject: |
|
|
| Curt Palme wrote: | I saw my first PS3 yesterday, and I have to say, from the outside at least, the PS3 looks a lot more solid than the X360. Not that that's saying much.
I did note that there's a LOT of HOT air coming out of the PS3 as well, so let's revisit in a year from now... |
The amount of heat was a concern for me too, but you know what? I did a LOT of research into it and it seems that those Sony engineers really pulled out all stops when designing the cooling of the PS3 and everyone seems to all agree that it really does an excellent job at cooling the innards. See this post for pics.
Better to have the heat come out than for it to feel cool on the outside I say!
Kal
_________________
Support our site by using our affiliate links. We thank you!
My basement/HT/bar/brewery build 2.0
|
|
| Back to top |
|
|
Joust
Joined: 05 May 2006
Posts: 2429
Location: Almonte, Ontario, Canada
TV/Projector: Marquee 8501LC
|
| Posted: Sat Aug 11, 2007 2:55 am Post subject: |
|
|
Yes I agree with Kal. I've designed this sort of stuff myself. The PS3 is a much better design. It has heat pipes and lots of heat sinking and most importantly a path to carry the heat away. The 360 has a poor heat sink and a bad path for the GPU.
another thing to note:
Japanese design is such that they make a central frame and bolt bits onto it until its a finished product. Frame, board, heat sinks, chassis parts, casings. The 360 is old school, a box, with bits shoved into it. the final case is a clamshell wrapped around that central box.
interesting eh? The last generation was the same way.
|
|
| Back to top |
|
|
JustGreg
Joined: 07 Mar 2006
Posts: 3098
Location: Kenosha, WI
|
| Posted: Sat Aug 11, 2007 3:52 am Post subject: |
|
|
I think the PS3 and 360 probably generate an approximate amount of heat it's just the 360 wasn't engineered or manufactured to deal with the heat it generates and that includes at the board level not just heatsinking and airflow/CFM's.
That 1.5-ish Billion $$ M$ is throwing at this is like trying to push a rope IMO. They'll be lucky to even have an Entertainment Division left when this all plays out. 3 year warranty extension for a product that fails after "repair"? They are performing NO mods...they're just reflowing the solder on the mobo amd shipping them back. I don't get it. It's like having a shorted outlet and running up and down stairs forever resetting the circuit breaker unless you fix the problem...there'd be no end to it.
All that aside...I'm one PO'd consumer. I couldn't even bring myself to call them when I got home from work. It would have just been a string of hangups because I'd be swearing up a storm. I'll talk to Auto Max and Hajji tomorrow. And these f*ck*** are the ONLY company allowed to produce a product that it's against the LAW for the receipt holding consumer to open and modify. 
<mumbling> MAN! Every time I run a line through something on the To-Do list.........
_________________
Greg
"Is it ignorance or apathy? Hey, I don't know and I don't care!" --Jimmy Buffett
|
|
| Back to top |
|
|
WanMan
Joined: 19 Mar 2006
Posts: 10270
|
| Posted: Sat Aug 11, 2007 2:32 pm Post subject: |
|
|
I could use my Fluke Mini 61 IR thermometer to check. 
_________________
Trust no one. Absolutely no one. Advice of the board.
|
|
| Back to top |
|
|
erikjohn
Joined: 08 Mar 2006
Posts: 636
Location: Florida
|
| Posted: Fri Aug 31, 2007 7:21 pm Post subject: |
|
|
Well I thought maybe I would be oneof the lucky ones since my 360 doesn't get a whole lot of use and I didnt get it until about 6 months after they came out. I reconfigured my setup a couple weekends ago and moved things around. Went to go turn it on the other night and.....
Red Ring of Darth!
I am not even gone mess with those joeish bastards at MS. Curt is going to fix it.
(No offense to any Joe's out there.)
_________________
EJ
|
|
| Back to top |
|
|
JustGreg
Joined: 07 Mar 2006
Posts: 3098
Location: Kenosha, WI
|
| Posted: Fri Aug 31, 2007 7:31 pm Post subject: |
|
|
DOH!
Say hi to Max the automated moron for me. 
I was just reading the other day repair is backed up 6-8 weeks.
As a parting gift tho MS is including a free game with the repair. Probably some cutout bin POS software tho.
Hey...tell Hajji (when you get to him after Automated Max) that you want a copy of BioShock!!! That game is simply frigging amazing. For you guys with moome gamma and MP's mods it would cause instant orgasm.
I have to replace one of our dying cars so there goes my MP fund...for now, so I have to crank up the brightness to compensate for poor black levels in that game but it's by far the most immersive and visually appealing I've played in a very long time.
Anywho...let us know how long it takes to get it back.
Greg
_________________
Greg
"Is it ignorance or apathy? Hey, I don't know and I don't care!" --Jimmy Buffett
|
|
| Back to top |
|
|
|
|
