| Author |
Message |
poen
Joined: 21 Dec 2012
Posts: 51
|
| Posted: Tue Dec 29, 2020 11:38 am Post subject: Sony 1292 - Error Code 10 - HV Over |
|
|
Dear all,
Was wondering what a 'HV Over' error code means on a Sony 1292.
Unit boots up, and gives code 10 after 6 seconds or so.
What does HV mean and in which board(s) could this issue be?
Appreciate the help!
|
|
| Back to top |
|
 |
CIR Engineering
Joined: 25 Aug 2008
Posts: 4269
Location: Chicago USA & Berlin Germany
|
| Posted: Tue Dec 29, 2020 4:06 pm Post subject: Re: Sony 1292 - Error Code 10 - HV Over |
|
|
| poen wrote: | Dear all,
Was wondering what a 'HV Over' error code means on a Sony 1292.
Unit boots up, and gives code 10 after 6 seconds or so.
What does HV mean and in which board(s) could this issue be?
Appreciate the help! |
Not sure why this error might be thrown on a 1292 other than the obvious as HV means "high voltage." Maybe this could have to do with a bad splitter or high voltage lead. Have you removed or unplugged the HV on any of the tubes lately? Maybe a lead isn't inserted all the way and it's arching?
craigr
_________________
JETI 1501-HiRes 2nm Spectroradiometer
JETI 1211 Spectroradiometer
Photo Research PR-650 Spectroradiometer
Klein K10-A Colorimeter
Murideo Fresco SIX-G HDMI 2.x Multimedia Generator
Murideo Fresco SIX-A HDMI 2.x Analyzer
Light Illusion ColourSpace XPT Color Calibration Software
Light Illusion LightSpace XPT Pro Version 10.x Color Calibration Software
OMARDRIS JVC Software Patch to use K10-A and Jeti with JVC OEM AutoCal Software!
Sencore CR7000 CRT Tube Analyzer / Rejuvenater
Authorized Dealer for Lumagen & just about everything worth buying 
www.CIR-Engineering.com - craigr@cir-engineering.com
Phone: 865-405-6892
|
|
| Back to top |
|
|
poen
Joined: 21 Dec 2012
Posts: 51
|
| Posted: Tue Dec 29, 2020 6:26 pm Post subject: Sony 1292 - Error Code 10 - HV Over |
|
|
Thanks for getting back to me.
The error starts now with 08, followed by 10.
I have changed the PSU and the two boards on top (DC and E board) I will move my old ones back to see if it works again.
Previous PSU blew up, reason I had to change it.
|
|
| Back to top |
|
|
poen
Joined: 21 Dec 2012
Posts: 51
|
| Posted: Tue Dec 29, 2020 7:13 pm Post subject: |
|
|
|
Alright, placed a second spare PSU that I had- codes are gone now- all boots up but the colors are very shaky / moving from left to right very fast- what could this be?
|
|
| Back to top |
|
|
|
|
