jaredjaric
Joined: 05 Jun 2007
Posts: 228
Location: Philippines
|
| Posted: Wed Nov 11, 2015 6:02 pm Post subject: 909 hv stable now |
|
|
Just an update,
So the Cinemax is replaced with a 909 , both units have hV issues. They are mostly eating quads and splitters.
Only one eht down. Mot spares are used , except for one quad claimed as new/open box.
The 909's quads came from a 919 , and the splitter from my spares.
black bands in the middle when adjusting focus, fixed by 17v readjustments.
So for every HV part changed the 17 volt drops quite a bit i this 909.
Green tube is focusing normally now, and the whole video is not pulsing anymore.
HV seems stable except for some little clicks once in a long while.
PQ is great now and have exceeded 6 hours of viewing, plus hours of readjustments.
New issue with the 909 is left and right adjustments are impossible.
Convergence is good either x or y axis.
The sides needs keystone adjustment and i need to fix the wavy odd side.
so far the the RGB is well aligned or converged.
On what board does this east to west adjustment belong. i swapped a convergent board from the 919 already and still no changes.
|
|
