Tim in Phoenix
Joined: 21 Oct 2006
Posts: 4409
Location: Phoenix
|
| Posted: Mon Aug 12, 2013 4:50 pm Post subject: |
|
|
Hello
The LVPS is in "hold down", meaning power is shorted to ground, it will not come up and damage itself, it sounds like the +15 rail.
LVPS LEDs table standing.........left -15 -85 -24 +5 +24 +85 +15........right These are reverse on a ceiling
The following boards use +15 so unplug as many as you can and see if the LED shuts off: Focus, HDM, Vertical, Convergence, (try these first as they drive yokes and may have been hit by an arc), CLM, Neck boards (unplug one at a time), VIM, Color Correction and ACON
|
|
