CurtPalme.com Home Theater Forum

[HK-Steve]

Yes VNB was changed, nothing changed except for the retrace lines in the fist post pic.

Cheers

[Nashou66]

So it wasn't the Glycol?

Are you using a VP?

Athanasios

[HK-Steve]

Not had a chance to look at the glycol, yet.
I moved 2 sets of snooker table slates today upstairs in a friends club, body does not work anymore, 2 tonnes of slate, not nice.

Tomorrow I will have a good look, my Wife was watching till late last night, me a beer too many to be messin with the projector.

Cheers

[HK-Steve]

VP, yes, XS+

[Nashou66]

Cause it sure looks like low glycol.

But maybe try a BD player straight to the marquee, no VP.

Athanasios

[HK-Steve]

I think Tim, has nailed it.
Plus Curt.. backing it up. Plus Athanasios also.

I just finished playing some games with my boys, so turned the projector ON,
shook the projector the little it moves, can see the glycol moving at the top inside the LC chamber.
Both Red and Blue are below the top of the c-element. Green is full.

Will pull the tubes tomorrow for a top-up.


Much Appreciate all the comments and help.

Cheers

[HaydnG90]

I think I'd be concerned as to where that glycol went. You must have a leak somewhere to see that much loss. Make sure its not accumulating somewhere that could be hazardous or damage the electronics.

[HK-Steve]

I would have thought on the floor, as I see nothing on the covers or x-ray sheilds.

Weird.

[Nashou66]

Steve, it could have sprayed out from a leak along the bellow metal gasket ring as pressure built up to a different direction inside the PJ.

Look all over.

Athanasios