CurtPalme.com Home Theater Forum

lenusa · Joined: 26 Jan 2010 Posts: 1 Location: Portland, Oregon

Hi guys (& gals)!

Recently I purchased a Moome card so that I could convey HDMI input to my CRT projector.

The Moome card slid right in and seems to be talking with the projector. Expected working lights are functioning. However, the Electrohome does not recognize any input through the Moome HDMI connectors.

I believe that there must be some software instruction to give to the CRT, to receive the Moome input, but I cannot find reference to such a "trigger" anywhere.

Can you please help? What must I do following installation of the Moome card?

The remote that came with the Moome card elicits no response of any kind from the CRT projector.

Though I think it not relevant, my projector is a Vidikron Vision One, which is based on the Marquee 9500LC

Thanks for any assistance you can provide.

Len Sad

cmjohnson · Joined: 03 Apr 2006 Posts: 5180 Location: Buried under G90s

Does your HDMI source indicate that you have an HDMI link when it's connected up? You should get an indication on the player, somehow.

The input slot that the Moome card runs on is slot number 2. Hit INPUT 2 to access it.

Your Vision One is a straight 9500LC with a different shell.

How long is your HDMI cable? The shorter the cable, the better. I have to use a 6 meter cable and I sometimes have
trouble getting a picture at 1080p but 1080i and below always works. Oddly enough, if it's going to work at 1080p
on any given day, it'll ALWAYS work all day. But when I shut down for the night and try again the next day, maybe it'll
work, and maybe not.

I think my issue is with cable length. Yours could be, too. So how long is your cable?

CJ

dturco